Quantcast
Channel: Intel Communities : All Content - Desktop Boards
Viewing all 4931 articles
Browse latest View live
↧

Intel D425KT Desktop Board Onboard Audio Device Not Working

December 27, 2014, 10:00 am
$
0
0

Hi Team,

 

I have installed Windows 7 Ultimate in my desktop. Its having a D425KT motherboard. Onboard audio is enabled in bios. Still its not being detected by the OS. I have installed the below driver files. Also I have tried using the Intel Driver Update Utility Installer. Still no luck.

 

  1. INF_allOS_9.2.0.1030
  2. LAN_allWin7_7.017_PV_RTL
  3. GFX_Win7_32_15.12.75.50.7.2230_PV_Intel
  4. AUD_allOS_11.50.0.43969_PV

 

below is the output of the board id tool.

boardID.png

Below is the device manager screen.

devmgr.png

Appreciate your help on resolving this.

↧
Search

Intel Smart Response Technology Issue

August 25, 2011, 5:27 pm
$
0
0

I recently had this working perfectly until I upgraded to new hard drives. So I understand the process of how to set everything up. Make sure you are in Raid in bios, install windows, tell the program you want to use your SSD to boost your HDD. (The process in a nutshell). So down to the problem.

 

I open up the Intel Rapid Storage Technology program.

I click the Accelerate tab.

I go down to the "Enable acceleration" link and click it.

It ask me for my settings, I select them. (Fairly simple with one SSD and one HDD.)

-I chose Full disk and Maximized mode in case anyone is curious. I also tried all the combinations to see if it would work any other way.

I then click the "OK" button.

 

This is where the issue is.

 

It brings me back to the Accelerate tab saying:

Accelerated device: None Select device

Acceleration mode: None

 

BUT, the SSD is cached.

 

The little bit of trouble shooting I attempted was:

-Restart the computer (obvi).

-Reinstall the Intel Rapid Storage Technology program.

 

System Specs:

Asus Maximus 4 Gene-Z (It's a Z68)

i7 2600k

Corsair memory: CMZ8GX3M2A1600C9R

Corsair SSD Sata 3: CSSD-F60GB3-BK

WD Black 2TB: WD2002FAEX

↧
↧

DZ77GA-70K BIOS mouse issues

April 25, 2012, 1:21 am
$
0
0

I have a Razer Imperator 2012 and getting this mouse to work with the BIOS seems to be downright impossible. If it wasn't for the classic mode I probably would have gone made by now. Anybody have any similar issues with mice on this board?

↧

how to get drivers for intel celeron awrdacpi motherboard

October 30, 2009, 4:29 am
$
0
0

Hi

I need intel celeron awrdacpi motherboard sound and vedio drivers to download. where can I find them? Any help will be really appreciated.

Thanks in advance.

↧

S5520SC Board will not accept over 8GB memory. What to do?

December 28, 2014, 10:23 pm
$
0
0

My S5520SC Intel Board will not accept over 8GB memory. What to do. Running XP 64 bit.

 

Also forum does not apperar to have an English Language option.

 

Thanks

Bob  AZ

↧
↧

Changing bios configurations

December 23, 2014, 2:22 am
$
0
0

what changes are required to make in bios(version SA86510A.86A.1024.2006.0504.1017 also my board model is D865GSA) in order to make it boot windows 7 installation usb. I had booted ubuntu using usb in same pc, but windows 7 usb gives error("disk read error occured press ctrl+alt+del to restart"). There is no problem with usb or the iso as it(usb) can boot on ther pc's and i had verified the checksum of the iso.

↧

What is the correct arduino board for use with Intel Edison Module? (Q)

December 30, 2014, 9:34 am
$
0
0

Hi all,

 

 

I bought the Intel Edison Module (without arduino board) and I am interested to buy a correct board (Arduino breakout) without incorporate the Intel Edison Module

 

 

Could you facilitate me more information about these boards?

 

 

Thanks!

↧

DZ77SL-50K How do you configure Secure Boot options?

December 30, 2014, 6:05 pm
$
0
0

Does anyone have any documentation on how to configure Secure Boot?

 

I'm looking for specific steps on how to get the UEFI interface to load keys. You can put a check box by Secure boot but not check any of the other options.

 

I once found the steps here in the forums but no longer can I find the posts.

 

I also found online a nice site that documented the Visual BIOS but it was older and did not cover Secure Boot.

 

Is there no documentation on the Intel site on how to correctly configure Secure boot?

 

I've found how to install Windows 8/8.1 but no real articles on the correct procedure to setup secure boot.

↧
Search

DZ77SL-50k problem

July 25, 2012, 2:29 am
$
0
0


Hi

 

Sorry for my poor english as first. There is my problem.
yesterday i build new system with

-Intel Dekstop Board DZ77SL-50K
-Intel Core i7 3770k

I installed Windows 7 Home premium 64 bit. and everything works fine until today. I parchused one Radeon HD5450 video card. I installed the latest drivers for her , and everything was fine. Then i tryed to install  the Virtu software , because i want to run both graphics adapter. When i click on the setup , it says "No sandy bridge , or Ivy bridge video adapters found , please.. et.c." As usual i think , the system cannot find my integrated HD 4k Graphics. I shutted down the system and move the HDMI cabble from HD5450 into the motherboard . Power up , and no screen . Then i moved cabble back to HD 5450 and screen is shown up. I shuted down the system and go into BIOS. (The BIOS is worked on default , and i am not overclocking the machine yet!) I went to Video configuration settings in BIOS , and i saw that the Primary video Adapter is set to "Auto" , I suggest that System runs on Discrette video first if settings are set to Auto. I change it to Internal Graphics , or i cant remember , i chouce the Second Options i think. Then i click F10 to save and restart. After restart no screen shown up on Integrated Video adapter , also on Discrette. I removed the New video card and i tryed only with Integrated , but no succes. As standart procedurre , i changed the Jumper on the motherboard on "Config" and same problem , no screen . I tryed everything to resset this BIOS Settings back to Auto , but fail. I remove the CMOS Battery for 1 Hour , then i tryed again , fail. I tryed every suggest from Intel Step for Resseting the BIOS , but no succes. Pls can you tell me what to do , to resset this BIOS , i am not tryed to recovery him yet, because i dont want to do that. The machine using the latest bios , i updated him yesterday.
Best regards and thx for anyone who helped here.

↧
↧

Ethenet no reconocida. Motherboard DZ77SL-50K

April 18, 2013, 10:52 am
$
0
0

Hi all

I'm with a problem in a DZ77SL-50K not recognizes the network card.

The drivers are the latest that I found on the site

The operating system is server 2008 R2 standard

The bios is enabled LAN

The message during the installation of the drivers says no network cards installed.

The drivers I've tried both 64 and 32 with the same result.

Thank you very much for the help you can give me.

 

 

 

 

regards

↧

DQ45CB Ram Question

December 31, 2014, 4:06 am
$
0
0

Can,I,use,1.8,v,and,1.9,v,ram,(same,size,and,speed),in a DQ45CB MB,together if I set the voltage to Auto?                                                                                                                                                                  Auto settings,are,1.8,,1.9,or,auto),

Then,place,them,in,pairs (same,manufacture,and,voltage,together In,primary,1.8,volt and,the,1.9 volt sticks in the secondary slots).

↧

Error de BIOS

December 2, 2014, 4:10 pm
$
0
0

Intel Hi friends please have a serious problem with my pc, motherboard DZ77GA-70K with the i7 3770 processor will install windows 8 64 bit a while ago EVGA GTX video card charging switch 760 when installing present problems annealing thereof me BIOS error gave the update day Friday I began to fail pc for errors that cometi to install programs that damaged the operating system decided to format and will put windows 7 ultimate 64 bits as I was giving some errors systems hangings enter drives your page look the same motherboard is installed but empeso restart the computer to turn on and off without knowing that do not recognize anything unplug everything in the same page INTEL suggests you remove the battery last night and so far remains the same please ask me can help you remove the memories thinking it could be leaving a single, clear video card and also continues with the same problem poir favor that I do well I hope prompt answers thanks ...

↧

Desktop board DQ965ss / DG965GF

July 17, 2014, 6:46 am
$
0
0

Desktop board DQ965ss / DG965GF has a red light when switched on. Can anyone help. Remember, no display, but the CPU fan turns on.

↧
↧

Enables individual SATA ports to be enable or disabled as needed ???

November 7, 2014, 3:22 am
$
0
0

Dear Support,

 

Why doesn't exist this option???

 

In this pdf You told that this option is available but it's not true

 

http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/q87-q85-chipset-brief.pdf

 

SATA Port Disable Enables individual SATA ports to be enabled or disabled as needed. This feature provides added protection of data

  by preventing malicious removal or insertion of data through SATA ports. Especially targeted for eSATA ports

 

In the bios there isn't an enable/disable option by sata ports individually, you can only enable/disable the hot swap capability.

 

Anybody who agree with me please share this request in other forums too because this feature uninplemented still yet.

 

With Best Regards

 

Andras

↧

Does not display for the fist time when powered on

January 1, 2015, 10:24 pm
$
0
0

I am system integrator, i am facing problem with Desktop board DB85FL with Core I7 4770. When i power on the system fist time i don't get display,

after i remove & put the power cord again & power it on, it is normal for the whole day: irrelevant of how many times turned off & on. I am using Transcend

Ram (1600Mhz, (2R/512Mx8/CL11) 8GB * 2. I had sold the Same configuration a couple of months back, the same problem persists in that also. I have

tried changing the SMPS & also I have ungraded the BIOS, but the same problem persists.

↧
Search

DZ86BC: with BIOS 0042 continuously restarting

January 17, 2014, 4:29 am
$
0
0

After an update from 0039 to 0042 the board did not pass the POST anymore. I disconnected all unnecessary hardware, reseated memory, with no success. No chance to enter the firmware settings. Port 80h code before restarting was E6.

After a recovery BIOS downgrade to 0039 everything was fine.

So what is the problem? Buggy BIOS? Hardware failure?

↧

Buenas tardes, habrá alguna motherboard que acepte 2 fuentes de poder.

January 2, 2015, 9:48 am
$
0
0

si existe, por favor indiquen el modelo de la motherboard.

↧
↧

motherboard intel

January 2, 2015, 10:24 am
$
0
0

alguien me podría indicar que motherboard soporta 2 fuentes de poder.

↧

Dúvida sobre memória para MB DX79SR com processador I7-3960x

January 2, 2015, 4:18 pm
$
0
0

Olá pessoal, tenho uma DX79SR com um I7-3960x e gostaria de saber quais módulos de memória são compatíveis para ampliar a memória, primeiramente para 32GB e depois para 64GB?

Estava avaliando o kit HX318C9SRK4/32 ou HX324C11SRK4/32. Alguma sugestão? Gostaria de comprar os corretos até pelo custo, porém olhando manuais não consegui chegar em uma decisão.

Alguém com conhecimento da placa e experiência poderia compartilhar?

 

Obrigado,

 

Dilson.

↧

Upgrade Motherboard

January 2, 2015, 5:19 pm
$
0
0

For, motherboard D102GGC2, should I upgrade the memory to the 2GB before looking to a different cpu?

Any suggestions for cpu , am not vary computer smart.

thx.

↧
Viewing all 4931 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>