After a bios flash to fix a graphics card problem, which did work, the bios now doesn't get past the Intel splash, Intel board. I can select boot menu but when I select my hard drive it freezes. I can also go into the bios settings and that seems to be functional. Any help would be appreciated.
I did start a thread on tomshardware and I ended up here. Look at thrad for more information: http://www.tomshardware.com/answers/id-2762191/past-bios-splash.html#16448647
Hello. I have 2 DQ77KB boards. All of them worked fine but suddanly one of them stoped to turn on.
I had try components (CPU,RAM, Power Supply) from this motherboard on second MB for exclude the probability of malfunction of them. All components work fine.
When I connect power supply and RJ-45 cable to workable MB i have seen 2 LEDs - 1 led on MB (green) and 1 LED on RJ-45 port (green), than I pressed "start" button on the Case and coller begins to rotate.
When I connect power supply and RJ-45 cable to not workable MB i have seen 1 LEDs - 1 led on MB (green) and all. When I pressed "start" button on the Case coller doesn't rotate.
The version of BIOS probably is 0056.
What is the cause of the problem and what to do?
Hi!
I am in a situation where I need to be able to prevent the Intel Integrator Toolkit bios installer from auto rebooting. I am running the bios update tool within an SCCM image deployment. The bios update tool auto reboots and breaks the rest of the deployment process, preventing other scripts from running. I'd like to not auto reboot, then reboot the machine after my other scripts run.
I tried some switches and options to prevent the auto reboot, but I cannot find any proper documentation on the options and switches for the installer.
We are updating the DQ77MK Intel Desktop board on Windows 8.1 x64, and we are using the Windows installer file version. (not PE or DOS)
Thanks for any help!
Hello. I am having issues with Intel Desktop Board DB65AL.
The issues are as follows:
This started when my GPU (AMD Radeon HD 6870) started dying. I have tried another GPU (AMD Radeon R9 270) but PC wouldn't boot with it. I tried re-adding the CMOS battery to reset the BIOS settings, but that didn't help. Right now I'm using the integrated GPU of Intel i5-2500. So, later on when I booted the PC, I was greeted with CMOS battery failure warning. So I tried to re-seat it and the battery itself worked fine but then new issues arose: delayed boot and lack of internet on first power on. The battery is somewhat loose in its holder, compared to how it should be according the 360 degree view found on Intel site, however I have tried to make it "sit right", but that didn't help.
There's also the issue that without the battery or with battery not being in absolutely perfect position (still working, but I guess the mobo wants it sit perfectly), PC tends to shut down and restart itself sometimes multiple times when trying to restart the PC, which leads to lack of internet connection as it counts as power off - power on rather than a restart without powering the PC off.
Anything I could do?
PC specs:
I have intel santa rosa gl960 mainboard (in my laptop), bios version : phoenix Q3B22
And, i want to update the bios but i cant find the latest bios file.
Hello, I have updated my support request advising my compatiblity issues with the replacement DZ77BH-55K board continue. I recently upgraded to Win10 and it seems this has compounded the issue rather than resolve it due to the lack of updated drivers.
Having be offered a refund on this ticket for my previous faulty board (DH67CL), I have uploaded my invoice on a number of occasions, but I haven't had a reply that it has been received. If I could be updated on the process of my refund, it would be greatly appreciated.
Hello! I have DQ77KB desktop board. I started todownload firmwareandcomputerstopped working. Tries to restorethe firmwareviaUSB drive, nothing happened.In the service centersaidthat they do notdumponthis motherboard. Now Iam looking foradumpbinfile.
Please, help me!
My DQ35JOE has always been slow to post. Black screen with cursor in upper leftt corner for 3-4 mins before POST. Computer seems to have run fine after finally starting. In trying to correct this issue I updated the BIOS yesterday to: JO1143P. Update appeared to go smoothly, though still had a blank screen for 3-4 mins before POST. I then shut computer down, pulled power plug and upgraded the video card and RAM (from 2GB - 4GB). PC would not POST. I removed all upgrades, and it still won't POST. I then refered to recovery mode reset and tried:
Pulled plug, removed CMOS battery, removed peripherals, removed jumper, connected monitor to on board VGA connector and waited 1 hour. Copied .BIO file to CD and restarted PC. Now the screen is black with no cursor in upper left.
Copied .BIO file to thumb drive, with same end result. Connected monitor to onboard DVI, same result. Disconnected HDD to eliminate and possible noise. Upon investigation the only thing I see, or hear happening is: The case fans continually speed up and slow down. Keyboard is unresponsive, tapping Num Locks does not turn LED on. Screen remains black with no cursor in upper left corner.
Should I consider the board dead? Any further tips or tricks to try? Any help is appreciated.
Thank you,
Joe
Hello everybody,
I need your help please!
I bought a new Intel MB DH67BLR and install it with Core i5-2500.
The MB AA# is G44434-200
After installing a working RAM and all the other components the system turn on with 3 beeps no video no post only a green lighting LED.
According to a solved thread I should update my BIOS but according to the compatible CPU List to this MB my CPU is supported from 67 BIOS ver. Already!!!
How so then?
Please I need your help as soon as possible.
Thanks!
Send
Like0
Hi all. I recently bought (2 weeks ago) a brand new DZ77BH-55K to breathe some new life in to my old rig. I'm using an i5 2500k, 8g (2x4g) adata 1600 ram, Silicon Power 240 ssd, and a Seagate Barracuda 1TB Hdd. I have read numerous horror stories of bios updates gone wrong and I wish to avoid these problems. I started updating the bios from 0057 by updating each new bios one at a time in the order of release. I am now stuck at 0083with this error message: Flashing image for Intel Management Engine Firmware [Failed]. I read in a post on this site a person with a similar problem was advised to install 0083 then to update to the most recent. at the time of the post it appears 0087was the most recent, now however there is 0100. Can anyone tell me the best way to get my bios from 0083 to the most recent? thanks in advance
Recently installed Windows 10 pro 64 bit after selecting UEFI boot in the BIOS, deleting all existing partitions (they were MBR) and creating fresh GPT partitions. Monitor connected via DVI to HDMI cable.
Problem 1: System will not cold boot after a shutdown. Stuck on Intel boot screen; no text at bottom right (boot options and boot code). Have to press the reset button to load Windows.
I was able to get around this by disabling fast start in Windows power options.
Problem 2. System will not cold boot after hibernating. Stuck on Intel boot screen; no text at bottom right (boot options and boot code). Have to press the reset button to load Windows.
Fast start is already disabled. Need help in figuring out what to do next.
Latest BIOS - TCIBX10H.86A.0048.EB.EXE
i3 540 processor with 4 GB RAM
500 GB HDD
This is a regular HDD (not SSD). I really want the fast start and hibernation to work. Everything was fine in Windows 7 in legacy boot to MBR partitions. Everything was fine after upgrading to Windows 10 in legacy boot to MBR partitions.
After a bios flash to fix a graphics card problem, which did work, the bios now doesn't get past the Intel splash, Intel board. I can select boot menu but when I select my hard drive it freezes. I can also go into the bios settings and that seems to be functional. Any help would be appreciated.
I did start a thread on tomshardware and I ended up here. Look at thrad for more information: http://www.tomshardware.com/answers/id-2762191/past-bios-splash.html#16448647
Gostaria de atualizar a BIOS da minha placa DG31PR - AAD97573-205 - BIOS:PRG3110H.86A.0028.2007.0928.1134 - WINDOWS 7 Home Basic. Porém no seite da Intel nada encontrei, como também o Driver Update Utility 2.2 depois da varredura nada apontou para atualizar.
Muito Obrigado
EDSON
need driver for windows 10 pro x64
Hello there,
I own this borad DH87MC and I want to upgrade Windows 7 to Windows 10 Pro x64, yet I cannot find in the Intel download center any drivers for this OS.
Can someone tell me if Intel is working on this? Because I see many users here having problem with the LAN drivers and other stuff on Windows 10 with another boards, but nothing related to DH87MC.
Thanks!
I've got issue with desktop mainboard Intel DN2800MT. PC has worked as NAS server (24h/7).
Once upon a time, my PC has not stated - diode is blinking when I trying to start and nothing else happens.
What have I tried to resolve this problem:
- Reset BIOS
- Run PC without DDR's
- Was tested with different DDR's
- Was tested with different power adapters
Power adapters are working fine with other of my Intel's mainboards - so i suppose that's not the problem.
Please provide me solution for this issue.
Hi,
I have recently replaced an old faulty Sapphire HD 5850 card with new Asus Radeon R9 270 card. The problem is that on boot, my computer shows an Intel screen and then will get stuck - the only thing that shows up on display is "0_" text in the bottom right corner. The LED display on motherboard shows "00", no beeps.
I have the most recent BIOS installed, OS is Windows 7 64-bit.
HW:
Intel Core i7-860
Intel DP55KG
Do you have any suggestion what to try, or how to fix it?.
Thanks
DH87RL motherboard
Intel Desktop Utilities worked fine before.
After upgrade to W8.1 the IDU program works, but i cant receive info : in the window it stays spinning : see attached file
OS is W8 pro 64 bit
I did search - download and install latest drivers and bios update regards my system, but no result : IDU window stays spinning without receiving information.
What can be the solution to this ? Or where do i need to find - correct the problem ?
If more information is needed, i gladly hear it !
Thanks in advance for any help - information.
Best Regards,
Christof Vanstaen
Preciso muito dos Drivers desta placa mãe e não consigo encontrar em lugar nenhum...Obrigado pela atenção.
Hi...
Have just purchased the desktop board DZ87KLT-75K
I'm having some problems in locating the recommended 4th generation i5 cpu for it as I live in Australia and most stockists are out of stock...
Some of them say the 5th generation i5 cpu will work very well in it but cannot find any information on the Intel site so I figured id ask my question here in the community
Thanks in advance
Bill