Alright,

It has been a while since Intel released the infamous 0035 BIOS for DZ68BC board.

I have not been able to use my desktop at all. Is it really taking so long? There is plenty of affected customers waiting for a solution.

Obviously Ivy Bridge CPUs are working fine with this BIOS since I have not heard any complaints. BUT all Sandy Bridge users are getting more or less BSODs. Many of the cases even with default BIOS settings and Turbo Boost disabled, like myself.

I am not going to RMA my board because I hate to rip off all the components and cables that I assembled so beautifully (Yeah, it is a custom PC that took almost 3 months to build and sleeve the cables etc)

If nothing happens in next two months, I have to violate my rig and replace the board with Asrock (considered before as junk brand... I guess its high end nowadays)

Hello -

I have a Gateway 700XL desktop that I've updated throughout the last 7+ years without incident.  I recently lost the OEM HD (120Gig) and the slave HD (250G on a controller) at the same time and replaced the HDs with a matching pair of WD Caviar Blue 500G SATAs and a StarTech 4-port RAID controller card.  I want to set the system up with a RAID 0 Stripped Array and seem to be having problems with the existing BIOS on the system.

What is listed now is:  MV85010A.15A.0049.P07 and I have found - in a discussion area here - that someone flashed to .P15 and had success with their problem.

I boot the system and it is bypassing the onboard BIOS complete.  StarTech said I didn't need to install drivers from their accompanying CD because the card itself has built-in BIOS, just to boot the system and hit CTL+S at bootup, go into the utility and set up the RAID array.  I am not getting into the card BIOS at all and it's also bypassing the system BIOS completely.  StarTech said the current BIOS were too old and this is an area where I do not feel the least bit comfortable but with instruction will fix the problem.

Please advise as to the latest BIOS download here that I can use (an not fry the whole system) so I can set up the RAID Array.  Without flashing the onboard BIOS I cannot use the parts I've bought and will have to return them with no other choice but to buy IDE HDs and abandon the RAID upgrade.

System specs:

Gateway P4, 2.53G single core

2 Gigs Rambus memory

Creative Labs Live Drive Soundcard and Drive

nVidia 6800 Video Card

Memorex DVD/CD burner

Allied 500W PS with 2 SATA connectors

USB PCI card

Firewire PCI card

The soundcard, video card, PS, Memorex burner, USB and Firewire cards are all upgrades/additions I've done over the years.  I was running Windows XP Pro *retail* (took the OEM version off) and was planning on upgrading to Windows 7 Ultimate which the Windows 7 Advisor said would work perfectly.  The system is capable of running Windows 7 and then some - I just have no idea how to find the right BIOS update download and also flash the BIOS without an OS or even HDs in the system.

Any and all input is greatly aprecicated.  Also, please remember I am "on the clock" if I have to return the two HDs and controller card to TigerDirect.

Thanks so much!

Hello everyone could you please help me with this problem ? I bought new memory modules (KVR400D2S4R3/2G) for this motherboard (D915GUX/D915GHA). All should be all right, but when i start PC i heard 3x beeps and end. I tried each memory slot, but with same result. Maybe I should try update bios. Or ? thank you for you advice

Hi,

I have recently replaced an old faulty Sapphire HD 5850 card with new Asus Radeon R9 270 card. The problem is that on boot, my computer shows an Intel screen and then will get stuck - the only thing that shows up on display is "0_" text in the bottom right corner. The LED display on motherboard shows "00", no beeps.

I have the most recent BIOS installed, OS is Windows 7 64-bit.

HW:

Intel Core i7-860

Intel DP55KG

Do you have any suggestion what to try, or how to fix it?.

Thanks

I have a problem with USBSER.SYS when I shut down my computer, but not always, here is the analyze with winDBG :

BUGCODE_USB_DRIVER (fe)
USB Driver bugcheck, first parameter is USB bugcheck code.
Arguments:
Arg1: 0000000000000004, IRP_URB_DOUBLE_SUBMIT The caller has submitted an irp
that is already pending in the USB bus driver.
Arg2: fffffa80074da010, Address of IRP
Arg3: fffffa80077570f0, Address of URB
Arg4: fffffa80042d6490

Debugging Details:
------------------

*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: usbport!_DEVICE_EXTENSION                     ***
***                                                                   ***
*************************************************************************

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

BUGCHECK_STR:  0xFE

PROCESS_NAME:  System

CURRENT_IRQL:  2

ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre

LAST_CONTROL_TRANSFER:  from fffff88007096f4b to fffff800030d5bc0

STACK_TEXT: 
fffff880`027fc2c8 fffff880`07096f4b : 00000000`000000fe 00000000`00000004 fffffa80`074da010 fffffa80`077570f0 : nt!KeBugCheckEx
fffff880`027fc2d0 fffff880`070a240a : fffffa80`064dc000 fffffa80`041ef620 00000000`00000000 fffffa80`064dc050 : USBPORT!USBPORT_Core_DetectActiveUrb+0x127
fffff880`027fc320 fffff880`070aae34 : fffffa80`074da010 fffffa80`069e0009 fffffa80`074da010 fffffa80`077570f0 : USBPORT!USBPORT_ProcessURB+0xad6
fffff880`027fc3d0 fffff880`07084af4 : 00000000`00000000 fffffa80`069ed050 fffffa80`06bd5190 fffffa80`074da010 : USBPORT!USBPORT_PdoInternalDeviceControlIrp+0x138
fffff880`027fc410 fffff880`00e0b7a7 : fffffa80`074da010 fffffa80`06678e40 fffffa80`074da010 fffffa80`074da010 : USBPORT!USBPORT_Dispatch+0x1dc
fffff880`027fc450 fffff880`00e13789 : fffff880`00e31b50 00000000`00000000 fffffa80`074da2d8 fffffa80`074da2d8 : ACPI!ACPIDispatchForwardIrp+0x37
fffff880`027fc480 fffff880`00e0ba3f : fffff880`00e31b50 fffffa80`03ff5010 fffffa80`074da010 fffffa80`060fa050 : ACPI!ACPIIrpDispatchDeviceControl+0x75
fffff880`027fc4b0 fffff880`084a6566 : 00000000`00000000 00000000`00000004 fffffa80`060fa050 fffffa80`071e1060 : ACPI!ACPIDispatchIrp+0x12b
fffff880`027fc530 fffff880`084d6d8f : 00000000`00000000 00000000`00000000 fffffa80`071e1060 00000000`00000000 : usbhub!UsbhFdoUrbPdoFilter+0xde
fffff880`027fc560 fffff880`084a4fb7 : fffffa80`074da010 fffffa80`06a24e40 fffffa80`074da010 fffffa80`074da010 : usbhub!UsbhPdoInternalDeviceControl+0x373
fffff880`027fc5b0 fffff880`00e0b7a7 : fffffa80`074da010 00000000`00000000 00000000`00000000 00000000`00000000 : usbhub!UsbhGenDispatch+0x57
fffff880`027fc5e0 fffff880`00e13789 : fffff880`00e31b50 fffffa80`03bafb50 00000000`00000080 fffffa80`074da2d8 : ACPI!ACPIDispatchForwardIrp+0x37
fffff880`027fc610 fffff880`00e0ba3f : fffff880`00e31b50 fffffa80`03ff6a00 fffffa80`074da010 fffffa80`07585358 : ACPI!ACPIIrpDispatchDeviceControl+0x75
fffff880`027fc640 fffff880`06426b1b : fffffa80`07583410 fffffa80`071e11b0 fffffa80`07585358 fffffa80`077570f0 : ACPI!ACPIDispatchIrp+0x12b
fffff880`027fc6c0 fffff880`06425824 : fffffa80`0412f4ab fffffa80`07583560 fffffa80`07583410 fffffa80`0412f4ab : usbser!RestartNotifyRead+0xcb
fffff880`027fc700 fffff800`030d95d1 : fffffa80`0412f4ab 00000000`00000002 fffffa80`07583410 fffffa80`060fadf0 : usbser!UsbSer_DevicePowerIrp_Complete+0x6c
fffff880`027fc730 fffff880`084c32ee : 00000000`00000000 fffffa80`071e1100 fffffa80`00000001 00000000`00000000 : nt!IopfCompleteRequest+0x341
fffff880`027fc820 fffff880`084c1df9 : fffffa80`0412f4a8 fffffa80`50536470 fffffa80`071e1060 fffffa80`0412f4a8 : usbhub!UsbhPdoDevicePowerState+0x50e
fffff880`027fc890 fffff880`084c1ba5 : fffffa80`0412f1e0 fffffa80`0412f1e0 00000000`00000000 00000000`00000000 : usbhub!UsbhPdoPower_SetPower+0xc1
fffff880`027fc8d0 fffff880`084a4fb7 : fffffa80`0412f1e0 00000000`00000006 fffffa80`03ff6a00 fffff880`00e1104e : usbhub!UsbhPdoPower+0xb5
fffff880`027fc900 fffff800`031d99e2 : fffffa80`0412f1e0 fffffa80`0412f1e0 00000000`00000000 fffffa80`0412f1e0 : usbhub!UsbhGenDispatch+0x57
fffff880`027fc930 fffff880`00e0b8b6 : fffffa80`06a24e40 fffffa80`0412f4a8 fffffa80`03ff6a00 fffff880`00e1104e : nt!IopPoHandleIrp+0x32
fffff880`027fc960 fffff880`00e097fe : fffffa80`0412f1e0 fffffa80`06a24e40 fffffa80`0642d3e0 00000000`00000000 : ACPI!ACPIDispatchForwardPowerIrp+0x56
fffff880`027fc990 fffff880`00e09681 : 00000000`00000000 fffff880`00e097b8 fffffa80`07583410 fffffa80`0412f4a8 : ACPI!ACPIDeviceIrpForwardRequest+0x46
fffff880`027fc9c0 fffff880`00e0d8c0 : fffffa80`06a24e40 fffffa80`06a24e40 fffffa80`0412f1e0 fffffa80`0412f4a8 : ACPI!ACPIDeviceIrpDeviceRequest+0x61
fffff880`027fca30 fffff880`00e0bbad : fffff880`00e31b50 fffffa80`03ff6a00 fffffa80`0412f1e0 fffffa80`0412f1e0 : ACPI!ACPIFilterIrpSetPower+0xe0
fffff880`027fca60 fffff800`031d99e2 : fffffa80`0412f1e0 00000000`00000000 fffffa80`0412f1e0 00000000`00000000 : ACPI!ACPIDispatchIrp+0x299
fffff880`027fcae0 fffff880`06425602 : 00000000`00000001 00000000`00000000 fffffa80`0412f1e0 fffffa80`0412f1e0 : nt!IopPoHandleIrp+0x32
fffff880`027fcb10 fffff800`031f1eb5 : 00000000`00000001 00000000`00000000 fffffa80`07583410 fffffa80`0412f288 : usbser!UsbSer_ProcessPowerIrp+0xbe
fffff880`027fcb50 fffff800`033722ea : ffffffff`fa0a1f00 fffffa80`03bafb50 00000000`00000080 fffff880`00000001 : nt!PopIrpWorker+0x3c5
fffff880`027fcc00 fffff800`030c68e6 : fffff880`03165180 fffffa80`03bafb50 fffffa80`07076060 00000000`ffffffff : nt!PspSystemThreadStartup+0x5a
fffff880`027fcc40 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxStartSystemThread+0x16

STACK_COMMAND:  kb

FOLLOWUP_IP:
usbser!RestartNotifyRead+cb
fffff880`06426b1b 85c0            test    eax,eax

SYMBOL_STACK_INDEX:  e

SYMBOL_NAME:  usbser!RestartNotifyRead+cb

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: usbser

IMAGE_NAME:  usbser.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  521ea410

IMAGE_VERSION:  6.1.7601.18247

FAILURE_BUCKET_ID:  X64_0xFE_IRP_DOUBLE_SUBMIT_usbser!RestartNotifyRead+cb

BUCKET_ID:  X64_0xFE_IRP_DOUBLE_SUBMIT_usbser!RestartNotifyRead+cb

ANALYSIS_SOURCE:  KM

FAILURE_ID_HASH_STRING:  km:x64_0xfe_irp_double_submit_usbser!restartnotifyread+cb

FAILURE_ID_HASH:  {e75f0255-5c12-c1b4-f5b8-38ca4ba5fbdc}

Followup: MachineOwner

What can I do? Anyone?

HI

i' musing deployment tools of micros oft for deploy os

I added netwrok drivers to out of box folder for intel dh61ww motherboard.

when running the deploying gotting error msg about missing drivers

please help me to find the current driver and fix it

WHat to do?

Thanks

After BIOS recovery from usb flash drive, computer doesn't start. No video output and keyboard with mouse doesn't work. Usb stick's LED blinks for a while. The green and blue LEDs are on. CPU fan is rotating. But nothing else happens.

After boot computer beeps 3 times then pause and everything repeats again. I changed the memory cards, but it doesn't solve the problem. I checked this memory with another computer. It works perfectly. Memory with less frequency doesn't fix it also.

I removed all peripheral devices, tried to use PCIe video card.

To recover BIOS I had MK0067.bio on my USB flash  (FAT32 16GB) with removed BIOS CFG jumper (yellow).

Can you give me some advice to solve this?

My configuration:

MB: Intel DQ77cp

Proc: Intel i5 3330

Memory: Kingston kvr16n11/4 (2 pcs.)

BIOS before upgrade: MKQ7710H.86A.0048

BIOS tried to install:  MKQ7710H.86A.0067

Dear community,

I have a problem with my DH87RL (Rev 401) with the latest Bios-Version RL0326.

After installing Win 8.1 64bit on the SSD (8 months ago) everything was fine. I have 2 optical drives, a SSD (EVO 840) and a Seagate HD (also with bootable Win 8.1). All these drives were shown in BIOS and in the boot-manager (UEFI mode and legacy mode). When I pluged in a USB stick (e.g. Ubunto or Win PE) I could also see it in the BIOS and the boot manager and I was able to boot from the stick.

Now I have the following problem: I couldn't boot from a USB-boot-stick that was displayed in the boot manager. Therefore I disabled the legacy mode and once I had booted again I switched it back on.

Now when I choose the boot-manager using F10, only my SSD and the UEFI : LAN connection are displayed. The Seagate-HD and every USB-boot-stick are missing. In BIOS, under UEFI boot page, all drives (except the optical drives) are available and I can boot from the HD with a double click. Under the legacy boot settings everything (optical drives) is missing

I already tried the default values without success.

I assume that I should erase the NVRAM or are there other solutions for this problem?

If I must erase the NVRAM, how best to do it (remove the BIOS battery)?

Thanks Mike

I have Intel DH67BL Motherboard does it supports SLI graphics card ( Dual Graphics card ) ???

Hello

Is it possible to use onboard graphics together with a separate graphics card? I have only one paired DVI/HDMI and one VGA on my video card and I want to connect two monitors using DVI/HDMI.

MB is DZ77RE-75K

Graphics is ATI Radeon 5450

BR,

Kir

Hi All

I inherited a clunker of a server which I am slowly decommissioning, but due to a 3rd party software problem I was forced to do some change diagnostics.

This DP35DP machine running Windows Server 2003 x86 had an old ethernet driver for the onboard controller installed, reporting as a 82566DC. So since there were no official Windows 2003 driver for the motherboard, I decided to search and download from the 82566DC resource page and update it to see if it resolved my other problem. 

The latest available driver 18.3 installed OK with no issue and my network is running, but I noticed I could not click the OK button on the properties page to accept changes.  Fortunately the default settings are fine for me. 

Is there somewhere I can get an earlier driver, since there is only the "latest" listed for me?

Is what I've done a bad thing?  There is a 15.3 driver for XP from the DP35DP motherboard page, will this work and is a better choice to try?  Or should I just leave the Windows supplied driver?

Thanks for your advice

Marty

Please Help!!! I removed my Intel DG41RQ Motherboard to clean it and did so with a dry cloth. Since i have done this whenever i shut down my computer it shuts down but the power supply to the board doesn't cut off. I tried replacing the SMPS as well as formatting the computer but nothing worked. Please help...

Hello sir im shabber from India,recently purchased intel core i3 3220 processor,intel dz75ml-45k mother board and Lg 23ea53 monitor and assembled with necessary cpu cabinet,1333 2gbX2 ram etc previously,i have dealt with vga connectivity motherboards.This motherboard is completely new to me,i bought a hdmi cable too to connect it to monitor Unfortunately,it doesnt detect signal.I tried changing monitor but still no response i made alll connections perfectly,mother board led lights,processor fan also working and other cpu cabinet fans are also working Everything is good keyboard leds are also lighting at start and after that cpu is working and no display at all I think the problem is with the hdmi cable Please help me Thanks in advance.

Hi!

Since a few says my PC don't reproduce the audio correctly.

Theaudio isdistorted andthe voiceis not heard. Always, even with only music, video, or game audio. Also, the stereo function doesn't seems to work, only mono.

I have been doing a couple of tests, and it seems to be that the problem is in the board.

You see: The problem occurs both on Windows (Windows 8.1 x64) and Ubuntu (Ubuntu v12), so is not a OS problem, and the drivers are good and updated, so isn't a driver problem either. My headphones works well in others computers, and when I test other sound devices in my PC, occurs the same problem... so is not also a sound device problem.

Thinking that the audio chip of the board where broken, I bought a sound card and stalled it... Same problem as before also with the sound card installed.

So, in conclusion, a board problem should be the cause of the audio problem I'vebeen having.

Can you guys please help me with this?

Thanks in advance!

My PC:

• CPU: Intel Core i3-2100 @ 3.10MHz
• Board: Intel DH67BL
• Audio Card: Encore ENM232-6CMI

We are developing digital Signage Systems using the DH61AG. Since 2 Years we are build System with the
same HW.

On two of my test systems Installed the new Bios gen 105. (Update from old gen 45 to 99 transition,104,105).

Since that day the bios has problems to recognize and initialize the TV Tuner Card stable. some time it
works, sometimes the card is not detected and not visible in the Bios. it’s a try and error game with power on / off

Both system where in the lab for over 1 year without any problem detecting the PCI-E Tuner Card (heavy daily use)we didn’t touch the HW from

the system for over one year, only the bios update was done. since that, I observe on both system the same behavior.

it is not the Tuner HW Card, its definably some changes in the Bios.

Unfortunately  it’s not possible to downgrade to 45 Bios Version, so the system are broken at the moment.

Does any one else run into this issue ?

Intel please help and fix it in the next Bios.  (106 ?)

Thx.

Hallo,

I have ordered a bunch of Intel desktop DQ87PG boards for the new computers in our classrooms. Before making a master pc for taking an image I wanted to update the BIOS to the latest version of 4th august 2014. Because I had already installed the OS I decided to use the EB.EXE file from the Windows OS. After the restart the pc went to the BIOS screen and get off after a few seconds. I left it alone but after 2 hours the pc continued to do so. It wasn´t possible to access the BIOS Menu, the Boot Manager or another function. I tried to reset the BIOS, following the instructions of the boards Manual, by setting the BIOS Setup Security Jumper to configure. After that taking no effect I decided do unplug the Mainboard from Power and take off the BIOS battery and let the Mainboard alone for 3 days. By enabling the Power again, the Mainboard sends the 3 beep RAM Warning after every power on and the screen remains black. I replaced the RAM by tested ones from another PC but that doesn´t change the failure.

After all I haven´t any idea what to do next, so I would be very pleased if someone have an advice to me.

I recently bought a second hand intel board that I plan on using as a server, an intel dg965wh.  However I'm running into an issue, whenever I tell it to shutdown, it instantly restarts again.  If I turn off the switch at the back, it will happen as soon as I turn it back on.  I've checked that the bios is set to stay off on power restore.  I've tried changing bios versions.  I've tried replacing the psu, as well as removing the board from the case.  I've disabled the LAN in bios, as well as disabling wake on lan.  No matter what the problem persists.  Not sure where I can take it from here, so does anyone have any ideas?

My mbo has unsuported bios so i  cant update bios from download center.I have tried all flash methods with no sucess.Number of mbo bios is gaz7710h.86a.3000.r09.1203090931.On download center all bios start with number gaz7711h......and mine gaz7710h.....Any help would be nice?

Hi,

First, my desktop configuration:

Intel DB85FL

Core i5 4550

HD 500 GB

8 GB RAM

GTX 650 1GB

Recently I reinstalled my SO and did it sucessfully so I went back to the BIOS to change the boot order (I remember I unmarked Legacy Boot and UEFI boot). After I've done that, my computer wont boot anymore. I mean: not even the BIOS screen (that intel symbol with the options to hit on the keyboard - F2 for enter setup, F7 to update, etc) appears. No video is displayed (the monitor keeps asking to plug the HDMI cable) and i can hear long beeps and long intervals for a while and suddenly they stop, but the computer still works (all fans and leds are on since the begining, but no video is displayed).

I already tried:

- Checking RAM.

- Running with onboard video.

- Recoverying BIOS with a .BIO file in a pendrive (done sucessfully but the problem is still occurring)

- Unplugning the jumper (wich lets me see the BIOS screen but displays that 4 option menu in which any option I choose it will ask to reconnect the jumper and problem comes back when plug it and power the pc again).

Can anybody help me? I can't belive I just broke my mother board configuring the boot order D:

I have two instances of the watchdog timer in my programs.I tried to uninstall one of them.The uninstall did not do anything and when I tried to remove another program said that the uninstall utility was running.How do I solve this Error that can be seen in the log file posted below.Please check the last line.

The log for the Watchdog timer says the following:

>>> 9/14/2012 09:23:27:750

[Install Configuration]

  Installer Version: 1.3.1.0

  Compile date = Wed Nov  3 12:40:04 2010

  OS command line = "C:\Program Files (x86)\Intel\Intel® Watchdog Timer Driver (Intel® WDT)\Uninstall\setup.exe" -uninstall

  Effective command line = -uninstall

  Windows Version = Windows 7 SP1

  Platform = 64 bit

  Core Version = 3.0.1 (IIF2++)

  System up time = 1752 sec

  Source: C:\Program Files (x86)\Intel\Intel® Watchdog Timer Driver (Intel® WDT)\Uninstall

[Languages]

  18EA48 - C:\Program Files (x86)\Intel\Intel® Watchdog Timer Driver (Intel® WDT)\Uninstall\Setup.exe

  User default LangID: 0x409

  User default UI language: 0x409

  Using setup.exe for strings

[Uninstall]

  Checking for admin rights

  Admin rights OK

  Showing uninstall wizard

!   Dialog creation error 0x715. Resource file may be missing or corrupt

!   Error 0x715 while creating uninstall progress dialog box